Unican

7000 Series

SIMPLEX 7000 Series Auxiliary Locks - Compact, stylish, and secure, the 7000 Series operates only when the correct buttons are pushed in the proper sequence and the turn knob is rotated to retract the deadbolt or latch.

Features

 

Specifications

SIMPLEX 7000 Series Auxiliary Locks

The 7000 Series pushbutton lock provides convenient auxiliary indoor/outdoor protection for commercial and residential applications. This lockset can be mounted above existing primary locksets or used alone. The standard model is equipped with a deadbolt (manual relock) and a saw-resistant, hardened-steel insert. Deadlocking latch models with automatic relock are also available..

7000

SIMPLEX 7000 Series Auxiliary Locks - Compact, stylish, and secure, the 7000 Series operates only when the correct buttons are pushed in the proper sequence and the turn knob is rotated to retract the deadbolt or latch.

Features

  • Rugged weather-resistant all-metal construction
  • Fully mechanical - not affected by power failures
  • Clutch-protected turn knob cannot be forced
  • No keyway to be picked
  • Large easy-to-depress pushbuttons
  • One-hand operation
  • Deadbolt models available with 2 3/8" (60 mm) and 2 3/4" (70 mm) backsets
  • Exterior trim plate covers 2 1/8" (54 mm) bores
  • 1" (25 mm) deadbolt models have a saw resistant hardened steel insert
  • Mounts above existing lockset or can be used alone
  • For interior or exterior use

Specifications

  • Exterior Trim plate covers 2 1/8" (54 mm) bores.
  • Construction:Weather resistant; all-metal cast front housing; force-proof clutch-protected thumbturn
  • Door thickness: 1 3/8" to 2 1/4" (35 mm to 57 mm).
  • Latch: See descriptions of individual models.
  • Strike: Models 7002 and 7008 include a strike plate. Model 7004 includes a curved lip strike plate. Model 7006 includes a box strike for in-swing wood doors and a flat strike plate for out-swing wood doors.
  • Installation:Through bore for housing: 1 3/8" (35 mm) dia. Cross bore for latch (except 7006): 1" (25 mm) dia. Through bore for combination change sleeve 3/4" (19 mm) dia. Minimum stile required: 4" (102 mm).
  • Control: Use a standard Phillips screwdriver to change combination. Combination can only be changed from the inside.
  • Reversibility: Latch and hand are field reversible. Weight: 2 1/2" lbs. (1.1Kg


Contact Central Safe & Locksmith Co.   |   202.842.0414   |   FAX 202.842.0713    |   1107 7th St. N.W.   |   1756 Columbia Rd. N.W.