Arrow

Arrow 100 Series Exit Alarms

Architects look to Arrow as a complete resource-our ability to provide a complete line of door hardware that includes aesthetically pleasing alarmed hardware illustrate security solutions to the specifier.

• Chassis-Non-ferrous alloy cover and base 8-3/8" X 2" X 2-5/8". Tamper proof cover screw sets unit into alarm upon unauthorized removal of the cover
• Power/Electronics-9 volt battery powered. Modern solid state electronics. Magnet activated.
• Doors-For inward and outward swinging doors with 4" minimum stile.
• Alarm/Horn-Alarm sounds for 2 minutes, shuts off and automatically rearms itself. Piercing high frequency horn. Rated for 90 decibels at 6 feet.
• Cylinders-Inside cylinder operation to arm or disarm unit using 1-1/8" mortise cylinder. Outside rim cylinder operation standard. (Order cylinders separately).
• Handing- Non-handed
• 110 Series-Pushbutton test to determine available battery power.
• 130 Series-15 second delay upon arming permits key holder to exit door without sounding alarm.
  Low battery alert causes unit to chirp intermittently to indicate low battery power.
  Red LED indicator flashes when violation occurs. Light continues to flash beyond alarm cycles and can only be turned off with the inside key.